PTMS magnetic separator is composed of five parts: magnetic separator (main machine), coil cooling system, rectifier power supply, pneumatic control system and electrical control system. PTMS magnetic separator is placed in a pin-mounted solenoid coil with a certain amount of magnetic conductive stainless steel wool (or steel plate mesh). After the coil is excited, the magnetic conductive stainless steel wool is magnetized.
PTMS magnetic separator: When the paramagnetic material passes through the steel wool in the separating tank, it is subjected to a magnetic force proportional to the product of the applied magnetic field and the magnetic field gradient, and adsorbed on the steel wool surface instead of the magnetic material passing directly through the magnetic field. Through the non-magnetic valve and pipe, flow into the non-magnetic product tank.
When the weak magnetic material collected by the steel wool reaches a certain degree (determined by the process requirements), the ore feed is stopped. Disconnect the excitation power supply, flush the magnetic material, and the magnetic material flows into the magnetic product tank through the magnetic material valve and pipe. Then a second PTMS magnetic separator operation is performed, and the cycle continues.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com