PTMS MAGNETIC SEPARATOR The common solution to the wear phenomenon is the protection of the wear, the use of PVC layer to wrap the skin, adhesive bond PVC layer, can greatly improve the service life of the full magnetic drum skin. In this way, not only the magnetic field on the magnetic surface is small, but also the wrapping tightening force is strong enough on the magnetic system, and the effect is obvious.
There is also a magnetic system fixation, the use of glass ribbon brush epoxy resin, iron packaging belt, stainless steel plate to wrap the whole magnetic system, using the thickness of 0.5 stainless steel plate to wrap the magnetic system, the two ends of the steel plate is clamped with thin plates and fixed with bolts, and finally connected with bolts to adjust the tension. Only when the wet PTMS MAGNETIC SEPARATOR gap is well adjusted to ensure its better work,
In the process of using wet PTMS MAGNETIC SEPARATOR, magnetic separator gap adjustment is also very important, first of all, to understand how to install wet magnetic separator, correct installation is the premise of safe production, equipment installation is debugging stage, adjust the magnetic separator work clearance, can bring unexpected effect.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
