Foshan Powtech Technology Company Limited.
Home > News
PTMS MAGNETIC SEPARATOR Operation steps and ensure
Time: Jun 01,2024

Quartz Processing line 

Open the power switch of PTMS MAGNETIC SEPARATOR and start the iron removal machine; adjust the speed of the feeding device to gradually increase to the preset feed amount; observe the working state of the iron removal machine to ensure that the material enters the iron removal machine smoothly; regularly check the iron removal effect, can be judged by observing whether the material after the iron removal contains iron impurities;


PTMS MAGNETIC SEPARATOR

If the iron removal effect is not good, the magnetic field strength or feeding speed of PTMS MAGNETIC SEPARATOR can be adjusted. During the test, relevant data, such as feeding amount and iron removal efficiency, should be recorded at any time. After the test, the iron removal power should be turned off and the site should be cleaned. With the growth of the use time, the performance and safety of the electromagnetic suction cup will gradually decrease. After exceeding the use period, it should be scrapped in time.


what is magnetic separation method for concentration of ore?

PTMS MAGNETIC SEPARATOR Before the feeding test, the operator shall ensure the following points: check whether the iron removal machine is firmly installed and the components are fastened; ensure that the power supply of the iron removal machine is stable and well grounded; check whether the feeding device is intact and blocked; prepare the materials required for the test and ensure that the materials meet the processing requirements of the iron removal machine.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com

FOSHAN POWTECH TECHNOLOGY COMPANY LIMITED.

No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com

QR code

Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.   Sitemap   XML