PTMS magnetic separator adjustable arm can drive the drum to rotate clockwise and counterclockwise to realize fine adjustment of magnetic declination; When the last magnetic pole reaches the appropriate position (i.e. the center line of the magnetic pole is about 50mm higher than the height of the concentrate discharge lip), stop rotating the nut on the screw buckle and tighten the solid bolts at both ends of the middle shaft.
For better results, the PTMS magnetic separator can be adjusted slightly above or below this position. In fact, the debugging of magnetic separation machine is very simple, the important thing is that the debugging personnel need to work seriously, meticulous and patient. It should be debugged by professional technicians before being put into use.
PTMS magnetic separator debugs the content before use. If the user can debug the content according to the above, the quality of the product will be very stable. There will be motor overheating in the work, which may be caused by too low voltage or poor contact of the switch line, we need to check the switch line regularly to ensure line stability and voltage stability.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com