1. On-site parking:
① After receiving the stop signal, after the material in the dilute media bin is processed, the PTMS magnetic separator cannot select the magnet mineral powder, stop feeding first, and then stop.
② Check whether the feed pipe, tank body and bottom flow pipe are blocked after stopping.
③ Clean up the coal slime and other debris accumulated in the feed box and tailings box to prepare for the next drive.
2, centralized control parking:
After receiving the centralized control stop signal, conduct a comprehensive inspection of the equipment. Confirm that there is no incoming material on the equipment and the equipment can be stopped.
3. Emergency parking:
In the event of an accident, PTMS magnetic separator should stop immediately to check and deal with the fault. Solve problems in time to avoid affecting the selection instructions.
PTMS magnetic separator Technical parameters:
Cylinder speed :22 RPM
Tank form: semi-countercurrent type cylinder field strength :190±10 hout
Processing capacity: 60-120 tons/hour feed strength: 3-0 mm
Magnetic separator requires water pressure is (0.2-0.4mpa)
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The elaborate magnetic field structure inside the PTMS Electromagnetic Separator host
