PTMS MAGNETIC SEPARATOR is mainly composed of four parts: cylinder, magnetic system, tank and transmission part. The cylinder is welded into a cylinder by 2 to 3 mm stainless steel coil, the end cover is cast aluminum, and the cylinder is connected with stainless steel screws. The motor drives the cylinder to rotate through the reducer.
The magnetic system is an open magnetic system, which is installed in the cylinder, the magnetic block is installed on the bottom plate of the magnetic yoke with stainless steel bolts, the shaft of the magnetic yoke extends out of the cylinder, and the shaft end is fixed with a crank arm, which can be adjusted to adjust the declination of the magnetic system, and can be fixed with a pull rod after adjustment; The working area of the tank body is made of stainless steel plate, and the PTMS MAGNETIC SEPARATOR frame and other parts of the tank body are welded with ordinary steel. According to the structural type of the tank body,
PTMS MAGNETIC SEPARATOR is divided into three types: down-current, counter-current and semi-counter-current. Magnetic separator is now the industrial iron, iron removal operation of the most common machine, suitable for the removal of iron or magnetic powder operation, magnetic separator is widely used in resource recovery, wood industry, mining, kiln industry, chemical industry, food industry, coal, building materials and other industries are used.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
