The traditional magnetic separator for the iron material at the bottom of the coal seam by the electromagnetic force is small, but also by the upper coal pressure, so the effect of iron removal is not good. PTMS In recent years, improve a way to improve the efficiency of iron removal, PTMS Magnetic Separator electromagnet "short-term strong excitation", that is, in the front of the electromagnet pole boots, the lower side of the belt device a sensor,
PTMS Magnetic Separator aims to use the sensor to detect the Magnetic material far away from the pole boot and weak absorption effect. Then the detected signal is transmitted to the strong excited rectifier through the sensor. When the Magnetic material passes through the bottom of the pole boot, the Magnetic coil is briefly applied with high power supply voltage, thus producing a strong Magnetic force flow. A short surge of electromagnetic suction will pull out the deep magnetic material, and the voltage will be restored to its normal state.
PTMS Magnetic Separator sensor device in front of the pole boots for the purpose of avoiding the interference of electromagnet Magnetic field, under normal conditions, iron material in the upper or middle of the coal seam, do not let the sensor send effective signals, as long as the iron buried at the bottom of the coal seam, can send effective signals.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
