PTMS magnetic separator is placed in the pin-mounted solenoid coil with a certain amount of magnetic conductive stainless steel wool (or steel plate mesh). After the coil is excited, the magnetic conductive stainless steel wool is magnetized. A highly uneven magnetic field is generated on the surface of the magnetic field, i.e., a high gradient magnetic field. Will experience a magnetic force proportional to the product of the applied magnetic field and the magnetic field gradient, adsorbed on the surface of the steel wool,
The non-magnetic material flows directly into the non-magnetic product tank through the PTMS magnetic separator and the magnetic field through the non-magnetic material valve and pipe. When the weak magnetic material collected by the steel wool reaches a certain degree (determined by the process requirements), the ore feeding is stopped. Disconnect the excitation power supply, flush the magnetic material, the magnetic material through the magnetic valve and pipeline, into the magnetic product slot. Then you do a second job, and the cycle starts again.
PTMS magnetic separator consists of magnetic separator (main engine), coil cooling system, rectifier power supply, pneumatic control system and whole machine electrical control system.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
PTMS Electromagnetic Separator The importance of the basis for equipment selection
