In general, the magnetic separation method is rarely used to separate weak magnetic minerals larger than 5-6 mm, mainly because of the low efficiency and high cost of screening fine ore, so the method is only used in individual cases, such as PTMS magnetic separator reprocessing operations for rare metal ore concentrates.
PTMS magnetic separator is mostly made of high-quality ferrite materials or composite with rare earth magnetic steel. Therefore, the development of our manufacturing technology provides high-quality equipment guarantee for magnetic separation process. In the continuous production test, the comparison test was carried out between the medium magnet and the original medium magnet in the same operation.
The results show that the tailings grade of PTMS magnetic separator has been reduced to 9.37%. Compared with the original PTMS magnetic separator, the tailings grade has been reduced by 1.04%, and the recovery rate has been increased by 6.59%. At the same time, the processing capacity has been greatly improved. It is in an advanced position in the field of medium magnetic field drum magnetic separator. At the same time, the equipment has practical popularization value for the beneficiation of medium magnetic minerals.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com