PTMS Magnetic Separator iron removal process should pay attention to :(1) according to the influence of ferromagnetic materials on ceramic products, analyze the source and severity of ferromagnetic impurities in products, and then take appropriate treatment measures to block the source of impurities. (2) When arranging the position of iron remover, the following principles should be followed: a) Iron removal should be carried out in the selected raw materials to avoid large particles and other impurities into the nearby iron tank, which will hinder the normal performance of the machine;
PTMS Magnetic Separator is divided into three types according to cleaning methods: manual cleaning, semi-automatic and automatic; It is divided by working state: intermittent type and continuous type. Material iron removal should be as far as possible in the lower temperature position, in order to extend the service life of the magnetic rod; Select PTMS Magnetic Separator with appropriate Magnetic field strength according to the category of ferromagnetic materials;
The slurry section height of PTMS Magnetic Separator with permanent magnet slurry groove should be appropriate to basically ensure that the ferromagnetic impurity on the upper surface can be within the range of effective Magnetic path. Due to the different prices of high and low temperature magnetic rods, the magnetic rods should be reasonably selected according to the operating temperature to achieve the purpose of economic use.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
