Semi-reverse current PTMS Electromagnetic Separator, the ore pulp enters the sorting space from below the trough in a loose suspended state. The movement direction of the pulp is basically the same as the direction of the magnetic field force, so the ore particles can reach the surface of the cylinder with high magnetic field force. In addition, the tailings are discharged from the tailings hole on the bottom plate, so that the height of the overflow surface can maintain the level of the ore slurry in the tank body.
The above two characteristics determine that the semi-reverse flow magnetic separator can get higher concentrate quality and metal recovery rate. Therefore, it is widely used for coarse selection and selection of fine fine particles (less than 0.2mm). PTMS Electromagnetic Separator Can be used in multiple series to improve the concentrate grade.
PTMS Electromagnetic Separator Maintenance quality is the premise and foundation of magnetic separator use, magnetic separator in the long-term use process, mechanical internal parts wear, clearance increase, with change, magnetic separator should have static balance and dynamic balance is destroyed, work stability, reliability and mechanical efficiency are significantly decreased, and even cause some assemblies and parts of permanent damage.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
