1. After the belt conveyor terminates, put the power switch of "local" and "centralized control" on the operation box of the belt transport head over the "parking" part, and don't forget the "parking plate" of the suspension.
2 .Then to the control box of permanent magnet PTMS magnetic separator in addition to the iron power outage, and then on this key to do a sign, such as a suspension marked "many people work, no reclosing" sign, to prevent other staff not master the situation when the power switch is opened by mistake, hurt people.
3.Remove PTMS magnetic separator. The first step is to remove all copper magnetic separator from the iron separator. Then press the power main switch, again carry out the power supply system for the iron remover, remove the signs of the suspension on the key, and enter the main power switch into the "centralized control" part.
If the iron removal requirement is very high, the serial work of multiple permanent magnet PTMS magnetic separator does not meet the requirements, it is necessary to use strong magnetic field electromagnetic iron removal, the use of electromagnetic iron removal can also be multiple serial work, in order to achieve better iron removal effect. If the iron removal requirements are low, in the belt production line iron removal, you can also choose hanging permanent magnet iron removal.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
