PTMS magnetic separator device technical measures. Construction Method Use pneumatic drill to construct anchor cable. Four 5t chain blocks are used simultaneously for lifting. First of all, the anchor cable shall be constructed according to the demarcated position of the iron removal machine. The detailed position shall be marked by the professionals with self-drawn marks on the site. The three construction personnel of the comprehensive driving team shall construct the anchor cable according to the marked point.
Construction anchor cable specification is f 15.24mm X 4000mm and three CK2360 resin cartridges are used for anchoring. The pulling force of the anchor cable is not less than 16.4 tons, and the exposed length of the anchor cable is 200-300 mm. During the construction of anchor cable, the operator shall set the PTMS magnetic separator operating platform according to the demand, and the operating platform shall be set strong. Do not stand on the belt operation.
PTMS magnetic separator is a mineral separation device that uses the magnetic differences of minerals to separate minerals. In addition to mining, PTMS magnetic separator can be used in a variety of industries, such as wood, kiln, chemical, food, etc. Through the classification of magnetic separator and magnetic separator technical parameters of the introduction to help you more comprehensive understanding of this equipment.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
