PTMS MAGNETIC SEPARATOR According to the selected medium, it is divided into dry magnetic separator and wet magnetic separator. Wet magnetic separator dry magnetic separator and wet magnetic separator have different requirements for the water content of the material, dry magnetic separator requires the material water content is low, with the material surface dry, good fluidity, no adhesion, agglomeration as the standard.
In wet PTMS MAGNETIC SEPARATOR operation, there are requirements for slurry concentration, and there is no obvious limit on the concentration of coarse particle magnetic separation, but the concentration of material should not be too low to effectively control the negative force of fluid in mineral processing operation, while the concentration of fine grain and fine particles is required to be slightly higher to ensure the recovery of magnetic minerals. Magnetic separator equipment can be divided into constant magnetic field magnetic field type magnetic separator, rotating magnetic field magnetic separator, alternating magnetic field magnetic separator, pulsating magnetic field magnetic separator.
Constant magnetic field magnetic separator uses permanent magnet material and direct current electromagnet, screw tube and so on as the magnetic source. The magnitude and direction of the magnetic field strength constantly change over time. Rotational magnetic field PTMS MAGNETIC SEPARATOR uses the magnet as the magnetic source, the magnetic pole rotates around the axis, the size and direction of the magnetic field strength constantly change with time.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
PTMS Electromagnetic Separator The importance of the basis for equipment selection
