The equipment used for DC magnetization is PTMS magnetic separator. When the coil is working, direct current is injected into the coil. The gap between the two cores can be adjusted by adjusting the nut. Before magnetization, clean the surface of the magnet with clean water, put the magnet into the gap between the core of the magnetizer, and pass direct current into the excitation coil to reach the maximum value, stabilize 3 ~ 4s to cut off the current, and the magnet has been magnetized.
Because the residual magnetic induction after magnetization of a single magnet is low, and the residual magnetic induction of the magnetic pile combination is high, it is generally a single magnet is magnetized first, and then the composite magnetic pile is magnetized, and the magnetization field strength of the magnetization machine should be 5 to 7 times the coercive force of the magnet. PTMS magnetic separator is suitable for wet magnetic separation of magnetite, pyrrhotite, calcined ore, ilmenite and other materials with particle size below 3mm.
PTMS magnetic separator is also used for iron removal of coal, non-metallic minerals, building materials and other materials. It is one of the most widely used and highly versatile machines in the industry. When the magnetic field strength and magnetic field force are low, the influence of the cylinder is greater than that of the cylinder speed. When the magnetic field strength and magnetic field force are large enough, increasing the cylinder speed of the drum magnetic separator will not lead to a significant reduction in recovery, but will improve the grade of the concentrate.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
