Foshan Powtech Technology Company Limited.
Home > News
The entire PTMS MAGNETIC SEPARATOR drives the machine
Time: Feb 14,2024

Silica Sand Processing Line

Before starting the machine, check the whole mechanical transmission system and machine oil, and then start the MAGNETIC SEPARATOR and water separator, and then start the charging motor after the PTMS MAGNETIC SEPARATOR rotates normally. After the loading motor starts and the chain bucket system runs normally, release the big arm brake. Slowly put it down, and when the sand in the hopper is more than 2/3, you can stop putting it down, and then support the big arm when it is 1/3.


PTMS MAGNETIC SEPARATOR

When the big arm and the water at a 45 degree Angle (that is, about 5 meters), should stop in the big arm. PTMS magnetic separator can remove the iron (FE2O3) inside. At this time, the amount of sand in the hopper is changed to traction control, the amount of sand in the bucket should be checked when moving forward, and the advance and retreat should be flexible, if the mechanical work of the sand collapse is difficult or can not be pulled, the traction rope should be loosened, so that the ship can retreat until it is dug.


what is magnetic separation?

If there is a large stone or mud layer under the water, the ship will have a violent vibration phenomenon, then it should immediately lift the dredging arm, avoid the obstacles and then proceed. When the machine is stopped, the sand in the hopper should be less than 1/2, and the big arm should be slowly lifted until the underwater four-corner wheel is exposed to the water. There is no sand in the hopper, and then stop the feeding motor, then stop the PTMS MAGNETIC SEPARATOR, and finally stop the water separation system.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com

FOSHAN POWTECH TECHNOLOGY COMPANY LIMITED.

No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com

QR code

Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.   Sitemap   XML