PTMS magnetic separator The magnetic block is mounted on the bottom plate of the magnetic yoke with a stainless steel bolt. The shaft of the magnetic yoke extends out of the cylinder and the shaft end is fixed with a crank arm. The swing arm can adjust the magnetic system deflection Angle, and can be fixed with a pull rod after proper adjustment. The working area of the tank body is made of stainless steel plate, and the rest of the frame and tank body are welded with ordinary steel.
At the same time, PTMS magnetic separator is made of high quality ferrite material or combined with rare earth magnetic steel, and the average magnetic induction intensity of the cylinder is 100-600mT. The minerals are gradually separated by high magnetic roller. The structure of the machine is straight flow type, with large processing capacity, high sorting accuracy, suitable for scanning and selecting weak magnetic minerals.
PTMS magnetic separator is suitable for the separation of 0.1-5mm magnetic minerals. Based on the feasibility of magnetic separation, the first magnetic separation is carried out by a weak magnetic roller. Its function is to separate high magnetic minerals (such as iron, magnetite, etc.) to prevent such minerals from entering the high magnetic roller stage and sticking to the surface of the high magnetic roller in large quantities, thus affecting the beneficiation effect; The ore grades are concentrate and tailings.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high field permanent magnet PTMS MAGNETIC SEPARATOR after energy saving transformation meets the requirements of sustainable development
