Foshan Powtech Technology Company Limited.
Home > News
The gap between the system and the inner surface of the PTMS magnetic separator cylinder is determined by welding magnetic separator parts.
Time: Apr 28,2023

Wet magnetic separator

Stainless steel (near the magnetic pole) and ordinary steel plate. Now with industrial plastic plate welding. A fountain at the bottom of the tank regulates the pulp concentration and disperses it into a suspension. The fuel tank has plug covers on both sides, which can be opened when parked to allow observation and cleaning of the fuel tank. You can adjust the distance between the can and the PTMS magnetic separator cylinder.


PTMS magnetic separation

Put the ore box and drain pipe into the ore box, and put the pulp into the tank smoothly and evenly. There is a water pipe in the box to regulate the pulp concentration. The drain pipe consists of steel pipe and plastic pipe, which can easily adjust the Angle, speed and quantity of the sprinkler. The PTMS magnetic separator pipe should only be used for clean water, but using cloudy water can easily stop the shower.


what is magnetic separation method for concentration of ore?

The transmission portion of the PTMS magnetic separator uses power from a three-phase asynchronous motor to drive the drum through gears and belts (the main shaft does not rotate). The speed of a cylinder depends on its diameter. A 600 mm diameter cylinder has a speed of 40 RPM and a 750 mm diameter cylinder has a speed of 35 RPM.

Contact: DELLA

Mob: +86-13929907491

sales@powtechina.com

FOSHAN POWTECH TECHNOLOGY COMPANY LIMITED.

No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com

QR code

Copyright © Foshan Powtech Technology Company Limited. All Rights Reserved.   Sitemap   XML