n the permanent magnet cylinder type PTMS MAGNETIC SEPARATOR, according to the different structural forms of the groove (downstream, reverse and semi-reverse flow), it is suitable for the coarse selection and selection of strong magnetic ore of different grain levels. Smooth magnetic concentrator is often used to process the coarse separation of magnetic particles with coarse particle size below 5mm, with high operation reliability and low power consumption, but can not obtain the maximum recovery and the best concentrate quality;
Countercurrent PTMS MAGNETIC SEPARATOR is suitable for coarse selection and sweeping of 0-0.6mm strong magnetic ore, and heavy medium recovery in coal preparation industry, but the energy consumption is high; semi-countercurrent magnetic separator is suitable for coarse selection and selection of 0-0.5mm strong magnetic ore, especially for 0-0.15mm strong magnetic ore, but the over coarse particles in the feed can produce precipitation in the tank.
Moreover, the properties of pulp (such as concentration, viscosity, pH value, etc.) have a great impact on the separation effect of PTMS MAGNETIC SEPARATOR. If the properties of pulp are not controlled properly, it may lead to incomplete separation or reduce the recovery rate of magnetic minerals.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
