PTMS MAGNETIC SEPARATOR The conveyor belt of the iron removal process will also be subject to friction in the process of transporting minerals. If the lubrication is insufficient, it is easy to lead to the surface wear of the conveyor belt, affecting the mineral transmission efficiency, and even may fracture. The roll skin is also easy to wear parts, and a suitable lubricant can form a layer of protective film on the surface of the roll skin to prevent it from being scratched by hard objects such as ore.
PTMS MAGNETIC SEPARATOR The bearings of the equipment need a lubricant with good compression resistance and wear resistance, while the conveyor belt may need a lubricant with good adhesion and flexibility. In the process of work, due to the influence of the surrounding environment, it is easy to absorb dust. If the dust is deposited on the surface or inside of the magnetic separator for a long time, it may cause a series of problems.
When selecting lubricants, the specified lubricant type must be used because the different components have different performance requirements for the lubricant. Only by ensuring that the PTMS MAGNETIC SEPARATOR maintains a good lubrication state, can we ensure the cooperative work of all its components and maintain the normal operation of the equipment. Daily cleaning of the magnetic separator is an important part of the daily maintenance work.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
