Today, I will introduce some points for attention in the maintenance of Hesha series PTMS magnetic separator.
1. Pay attention to whether all parts of the machine work normally;
2. The newly installed wheel is easy to loose and must be checked frequently;
3, bearing oil temperature rise, should be stopped immediately to check the reason to eliminate;
4. If there is impact sound when rotating gear is running, it should be stopped immediately for inspection and eliminated;
5. pay attention to check the wear degree of easy wear parts, pay attention to replace worn parts at any time;
6. The bottom plane of the PTMS magnetic separator device should be removed with dust and other materials so that the movable bearing cannot move on the bottom frame when the machine encounters materials that cannot be broken, resulting in serious accidents;
7.The bearing of PTMS magnetic separator bears all the load of the machine, so good lubrication has a great relationship with the bearing life, which directly affects the service life and running rate of the machine. Therefore, the lubricating oil injected must be clean and the seal must be good. Rotating bearings, roll bearings, all gears, movable bearings, sliding plane.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
