Different types of PTMS MAGNETIC SEPARATOR have different requirements for mineral particle size due to their different magnetic field strength, separation principle and other factors. Some magnetic machines are suitable for handling minerals with larger grain size, while others are better at handling minerals with smaller size. In order to meet the required particles need to be crushed with a reasonable crusher or roller mill.
For automatic wet PTMS MAGNETIC SEPARATOR, proper particle size range is key to ensure sorting. If the particle size of the mineral is too large, some magnetic mineral particles may not be fully adsorbed by the magnetic field and thus be mixed into non-magnetic minerals. If the particle size is too small, it may cause the agglomeration of mineral particles in the sorting chamber, which also affects the sorting effect.
When the particle size of the mineral does not meet the requirements, it needs to be treated. The crusher can break larger mineral particles into suitable particle size, and the roller mill is more suitable for fine tuning of particle size. Granularity control also requires consideration of the cost and efficiency of the entire PTMS MAGNETIC SEPARATOR beneficiation process.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
