PTMS magnetic separator is mainly composed of three main parts: cylinder, magnetic system and box bottom (tank). The cylinder is made of 2-3 mm stainless steel coil welded. The end cover of the cylinder is cast aluminum and connected to the cylinder with stainless steel screws. The use of stainless steel (copper) or aluminum cylinder, because these materials are non-magnetic materials, with better magnetic permeability, so that the magnetic field line will not form a magnetic short circuit with the cylinder.
PTMS magnetic separator The surface of the cylinder is also covered with a layer of wear-resistant rubber or a layer of fine copper wire for protection, so that the cylinder face is not worn. At the same time, it is conducive to the adhesion of magnetic ore particles on the surface of the cylinder, strengthening the carrying effect of the cylinder on the magnetic ore particles, and the cylinder is rotated by the motor.
Magnetic system is divided into three pole permanent magnet system, there are also four or multi-pole. The polarity of the magnetic pole is arranged alternately along the rotation direction of the PTMS magnetic separator cylinder, and it is fixed when working. When the magnetic ore particles are attracted to the surface of the cylinder and rotate with the cylinder, the magnetic turnover (also known as magnetic stirring) phenomenon is generated due to the polarity alternations, and the mechanical inclusion of a part of the non-magnetic ore particles in the magnetic ore particles are removed, which can improve the quality of magnetic products.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com