For some material tanks with high processing requirements, the tank will be designed to be larger to accommodate more pulp and improve the processing capacity of PTMS MAGNETIC SEPARATOR. In addition, the material of the tank also needs to have good corrosion resistance and wear resistance to ensure that it will not be eroded and worn by the pulp in the long-term use
The unloading device varies according to the type of PTMS MAGNETIC SEPARATOR. If it is a conventional cylindrical magnetic separator, the concentrate is unloaded into the concentrate tank under the action of the flushing water sprayed from the unloading pipe when the concentrate rotates with the cylinder to the edge of the magnetic system where the magnetic force is weakest. If it is a full magnetic roller unloading, the brush roller is used
This is akin to a relay race, where the rinse water, acting as a baton, carries the concentrate from the cylinder's surface into the concentrate tank. The pressure, flow rate, and spray angle of the rinse water must be precisely adjusted based on the specific conditions of the PTMS MAGNETIC SEPARATOR system to ensure the smooth discharge of the concentrate while preventing damage to the cylinder's surface
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
