Wet PTMS MAGNETIC SEPARATOR mainly consists of cylinder, roller, brush roller, magnetic system, fuel tank, transmission part of 6 parts. The magnetic separator cylinder is welded to pipe by 2-3mm stainless steel plate, end cover aluminum casting or workpiece, connected by stainless steel screws and bucket, motor or directly through the deceleration speed motor. The drive cylinder, magnetic roll and brush roller for rotary motion, the magnetic system is an open magnetic circuit system mounted on the cylinder and exposed fully magnetic.
Wet PTMS MAGNETIC SEPARATOR magnet with stainless steel bolt on the floor, the cylinder fork shaft, shaft fixed with a turning arm. The pull arm angle adjustment bar can be fixed and adjusted appropriately. Magnetic system, storage tank working area with stainless steel plate, bracket and other parts and ordinary steel welding.
As an important ore dressing equipment, wet PTMS MAGNETIC SEPARATOR plays a very important role for the use of manufacturers, and is indispensable in the daily production. However, with the progress of magnetic separator technology and the expansion of strength, the replacement speed of magnetic separator is accelerated, many use manufacturers worry about losing at the starting line, blind replacement, can not achieve the expected effect.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
High gradient PTMS Electromagnetic Separator makes production easier and improves sorting efficiency
