Half-countercurrent permanent magnet cylinder type PTMS MAGNETIC SEPARATOR, the slurry enters the sorting space below the trough in a loose suspended state. The direction of slurry movement is basically the same as the direction of magnetic field force, so the particles can be ground on the surface of the circular cylinder with high magnetic field force. In addition, the tailings are discharged from the tailings hole on the bottom plate, so that the height of the overflow surface can maintain the level of the ore slurry in the tank body.
The above two characteristics determine that the semi-reverse flow type PTMS MAGNETIC SEPARATOR can get higher concentrate quality and metal recovery rate. Therefore, it is widely used for coarse selection and selection of fine fine particles (less than 0.2mm). This magnetic separation machine can be used in multiple series to improve the concentrate grade.
Permanent magnet PTMS MAGNETIC SEPARATOR consists of rack, permanent magnet cylinder, transmission device, feeding tank, tank body and other main parts. The iron ore magnetic concentrator is mainly used in arid and water shortage areas, saving water resources, reducing the cost of mineral processing, and opening up a new way for the exploitation and utilization of ultra-lean magnetite.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Dry-type PTMS MAGNETIC SEPARATOR bearing spare parts replacement skills
