PTMS magnetic separator Charging motor starts, chain bucket system works normally, release the big arm brake. Gradually put it down, and when the sand in the hopper is more than 2/3, you can stop putting it down, and then support the big arm when it reaches 1/3. When the big arm and the water at a 45 degree Angle (i.e. about 5 meters), should stop in the big arm.
Remove 0.1~35 kg ferromagnetic material, internal permanent magnet system service life of more than 10 years. When the magnetic PTMS magnetic separator is large, it can be removed manually with a non-magnetic scraper or with gloves. It is suitable for continuous operation and the occasions with less iron content. Working principle When the granular material through the permanent magnet dump iron is just below, mixed in the matter guess ferromagnetic impurities about 0.1-0.36 kg is sucked up.
Adjust the amount of ore, its size determines the thickness of dry PTMS magnetic separator roller on the material layer, when the amount of ore is large, the material layer is thick, the magnetic force of the magnetic particles on the surface of the material layer is small, easy to be thrown into the tailings, increase the grade of tailings. When the fine grade is treated, the concentrate taste will be reduced, and the ore feed should be reduced to ensure that the required separation index is obtained.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Preparation work before implementing PTMS MAGNETIC SEPARATOR energy-saving retrofit
