Upper suction PTMS Electromagnetic Separator is mainly used for the coolant purification of various grinding machines, fine grinding, electrical processing, wire drawing machine and other processing equipment, as well as the coolant purification of the grinding machine and other fine processing machine tools. So what problems should be paid attention to in the process of installing the suction magnetic machine? Let's take a look at it here:
The flow rate and assembly modeling of PTMS Electromagnetic Separator should be set according to customer standards. If the inlet and outlet are not consistent with the machine tool, the variable diameter joint can be added for transformation. Before the installation, the water can be released when the direction is normal, and then the disc nut should be appropriately tightened, so that the rubber stick and magnetic barrel can reach the appropriate rolling state. The inspection and maintenance must be carried out under power and underwater water.
PTMS Electromagnetic Separator When not working for a long time, the box should be cleaned to prevent impurity accumulation and freezing. When the chain gap is too large, the tightness should be adjusted in time and oil the chain regularly. Do not let the impurities increase sharply, otherwise it will make the motor hold dead, to deal with the surface of the rubber stick and magnetic barrel attachments in time.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The high-gradient PTMS MAGNETIC SEPARATOR adopts a modular design concept, which is conducive to installation
