PTMS MAGNETIC SEPARATOR The size of the work gap will affect the effect of the sorting. When the gap is large, the flow of the pulp is also large, which is conducive to improving the treatment capacity. However, because it is far from the cylinder surface and the magnetic field strength is low, the tailings grade is increased and the metal recovery is reduced. According to the specific sorting requirements and equipment performance, the working gap should be reasonably adjusted to find the balance between the processing capacity and the recovery rate to improve the sorting efficiency.
PTMS MAGNETIC SEPARATOR The size of the cylinder speed also affects the selection index. When the speed is low, the output is low; when the speed is high, the centrifugal force is large, the magnetic turn effect increases per unit time, the concentrate grade and processing capacity are high, and the recovery rate is reduced. Therefore, according to the actual production situation, the concentrate grade, processing capacity and recovery rate focus requirements, to determine the appropriate cylinder speed, improve the separation efficiency.
PTMS MAGNETIC SEPARATOR If the magnetic system bias Angle is not appropriate, it will obviously affect the sorting index. When the Angle of the magnetic system is large, the tailings grade cannot lift the concentrate end, but increases the tailings. Suitable magnetic deflection Angle can ensure the normal shedding of concentrate and improve the separation efficiency and product quality.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
Why for PTMS Electromagnetic Separator magnetic roll the static balance test should be done after replacement
