The viscosity of slurry, the size of iron mineral particles and the flow velocity of slurry all directly affect the competitiveness, that is, the effect of iron removal. Therefore, when using PTMS Magnetic Separator, we should carefully master the "four degrees" of slurry (concentration, viscosity, speed and particle size) : particle size should be determined by the aperture selection of the purpose of the vibration screen; Velocity is directly related to flow rate; Viscosity is related to the properties of slurry, concentration and additives; The concentration depends on the proportion of water.
Practical PTMS Magnetic Separator has the following three conditions :(1) a strong enough Magnetic field source (F>Fc); (2) sufficient contact area to ensure opportunities and places to absorb prey; (3) Timely and effective cleaning (separation) of the absorbed ferromagnetic impurities, cleaning is the key to effective iron removal.
PTMS Magnetic Separator types commonly used in ceramic industry :(1) according to the characteristics of mineral principle, there are dry powder and wet type (slurry); (2) according to the way the magnetic field is generated, there are magnets and electromagnets; (3) According to the appearance structure: slurry groove interception type, slurry groove settlement type, cylinder tank type; Dry powder of hanging type, belt type and pumping vibration cabinet (frame), etc.;
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com