The flat PTMS magnetic separator is composed of a magnetic system rotating cage under the frame and a magnetic system hollow shaft concentrate tank driving device on the top. The elevation and levelness of the mounting frame are measured on the basis of the hollow bearing block. Because the flat plate series uses high-speed transmission technology, it has strong shock resistance and stability, at the same time, the flat plate series uses a lot of good technology, and some special technology must be added to the magnetic separation equipment.
The flat PTMS magnetic separator is composed of a magnetic system rotating cage under the frame and a magnetic system hollow shaft concentrate tank driving device on the top. The elevation and levelness of the mounting frame are measured on the basis of the hollow bearing block. For an ordinary industrial product, if you do not use high-frequency voltage or low power supply, its stability will be affected, the advantages of flat plate magnetic separator is high reliability and low noise,
At high frequency voltage, the magnetic field strength and noise level will affect the stability of the track. Flat PTMS magnetic separator transmission chain wear shall not exceed the regulations, such as affecting the normal use to resolutely replace, timely adjust the tightness of the transmission chain, proofread the transmission sprocket, linear deviation shall not exceed 1 mm, if there is deviation should be adjusted in time.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
High gradient PTMS Electromagnetic Separator makes production easier and improves sorting efficiency
