When the use of environmental dust (such as coal dust, soot, mud dust, dust, etc.) is serious, PTMS Magnetic Separator with fully closed structure should be selected. When the electromagnetic machine is installed in the middle (that is, in the same line arrangement), the hanging height can be appropriately increased because the material has forward momentum and is in loose shape, which is conducive to iron removal. However, the iron component within 800mm of the normal direction of the magnetic pole shall be changed to non-magnetic material.
When electromagnetic PTMS Magnetic Separator is installed in the middle (i.e., cross arrangement), in order to improve the effect of iron removal, a non-magnetic linear roller can be installed under the tape. When the belt speed of the belt conveyor is greater than 2.5m S, it should usually be mounted on the head. If the method of increasing the magnetic field strength is adopted, and the non-magnetic roller is equipped, it can also be installed in the middle, which can also achieve good iron removal effect.
Under normal circumstances, the Magnetic system structure of PTMS Magnetic Separator is open Magnetic circuit, and its iron absorption has the following characteristics; Suck the big long and the small short; Tending to absorb a point; Tending to settle by suction. Therefore, if the requirement of iron removal is high, the specification of PTMS machine should be appropriately improved or two-stage or three-stage iron removal should be adopted.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
High temperature PTMS MAGNETIC SEPARATOR deironing method is gradually moving towards new nano electrode materials
