It is very important to adjust the working gap of wet PTMS MAGNETIC SEPARATOR. In the field production, the working gap is generally adjusted within the range of 35~60mm according to the need. The working gap can be adjusted and changed by the gasket at the bottom of the bracket corner steel. There are many kinds of surface treatment processes of the full magnetic drum, which must be clear when choosing,
Otherwise, it may cause unnecessary waste or can not be used, the following are several common surface treatment types, and how to choose, the surface treatment of the full magnetic drum PTMS MAGNETIC SEPARATOR is generally divided into: A, tube light surface B, tube rubber surface (divided into three kinds: light bread glue, diamond glue, herringbone glue).
Selection guide for full magnetic drum PTMS MAGNETIC SEPARATOR:
1. In the case of small treatment capacity, narrow conveyor belt, dry environment and short transportation distance, the smooth surface magnetic drum can be selected.
2. High power, long transportation distance (more than 80m), humid environment, mud and dirt, this kind of situation is recommended to choose the rubber surface magnetic roller.
3. When the diameter of the full magnetic drum is greater than or equal to 800, it is recommended to choose the package rubber surface roller.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com