PTMS Magnetic Separator can be used to separate magnetic and non-magnetic materials. It can be used for wet magnetic separation of magnetite, ilmenite, pyrrhotite, roasted ore, ilmenite and other materials with magnetic particles less than 3mm. It is also used for iron removal of coal, non-metallic ore, building materials and other materials. Wet separator manufacturers use scientific methods for magnetic separation work,
After the newly purchased PTMS Magnetic Separator is pulled back to the separator, some customers do not use it. They do not know how to adjust the magnetic separator. In fact, it is not the problem of magnetic separator, the customer did not adjust the magnetic, so there is no material. Permanent magnet drum separator internal magnetic cylinder 1/3 inlay magnetic block, generally in 12-18 row, there is a link shaft rod control, pull the connecting rod, magnetic block from the cylinder table closer magnetic stronger, from the cylinder table farther magnetic weaker.
Customers can adjust the Magnetic field by themselves. When adjusting the magnetic field, the connecting screw should be adjusted to the required position. It can also provide a variety of wet PTMS Magnetic Separator, such as downcurrent, countercurrent and semi-countercurrent, according to customer requirements.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
