The distance between the suspension height of the permanent magnet PTMS magnetic separator and the equipment is determined by what. When the permanent magnet iron separator type is installed in the middle of the belt conveyor (i.e., cross-arranged), a non-magnetic linear idler wheel can be added below the belt to improve the iron removal effect. For non-ferromagnetic metal materials that cannot be absorbed by iron remover, use a metal detector for detection and manually remove the machine after the alarm or shutdown.
Permanent-magnet PTMS magnetic separator Suspension height and distance from the device are determined by what?
First, permanent magnet iron removal height affected by what factors
1. The tip is easy to hit into a ball; Suction is easily static. In the case of high iron removal requirements, the specification of iron removal accessories should be appropriately increased or multi-stage iron removal should be adopted.
2. When multistage iron removal is used, the late iron removal force should be higher than the previous one. Otherwise, the iron removal effect of PTMS magnetic separator is poor. There are many ways to remove iron from magnetic materials.
3, if the situation is complicated, should cooperate with our company's technical department, and according to the user's special use and special environment special design.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
