The working gap of PTMS magnetic separator refers to the distance between the shell and the bottom plate, through which the pulp passes. This gap is also the effective area of the magnetic field, and its thickness can be adjusted between 30 and 60mm.
PTMS magnetic separator Too large or too small working gap will affect the separation index. If the gap is too large, the magnetic field force near the bottom plate is small, and the magnetic particles or connected body particles here may flow into the tailings with the slurry due to the insufficient magnetic force, resulting in the tailings running black and the recovery rate is reduced. On the contrary, if the distance is smaller, the recovery rate will be higher, but the grade of the concentrate will be reduced.
If the distance is too small, the flow rate of pulp in the gap will be very fast, some magnetic ore particles will be washed into the tailings and reduce the recovery rate, at this time if the amount of pulp into the tailings is very large, because the gap is too small, the tailings can not run away, there is a full tank phenomenon.
PTMS magnetic separator is used to remove iron powder in the reuse of powder particles, etc. The magnetic separator is widely used in resource recovery, wood industry, mining, kiln industry, chemical, food and other factories.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
