After the pulp flows into the tank through the PTMS MAGNETIC SEPARATOR feed box, the ore particles enter the tank feed area in a loose state under the action of the water flow of the feed pipe. In the action of the magnetic field, the magnetic agglomeration of the magnetic particles forms a "magnetic group" or "magnetic chain", "magnetic group" or "magnetic chain" in the pulp by the magnetic force, the magnetic pole movement, and is adsorbed on the cylinder.
Because the polarity of the MAGNETIC poles is alternating along the rotation direction of the PTMS MAGNETIC SEPARATOR cylinder, and is fixed at work, when the "magnetic group" or "magnetic chain" rotates with the cylinder, magnetic stirring phenomenon occurs due to the alternating magnetic poles, and non-magnetic minerals such as gangue which are included in the "magnetic group" or "magnetic chain" fall off during the turnover. The "magnetic group" or "magnetic chain" that is eventually attracted to the surface of the cylinder is the concentrate.
The concentrate is transferred with the PTMS MAGNETIC SEPARATOR cylinder to the edge of the magnetic system where the magnetic force is weakest. It is discharged into the concentrate tank under the action of the flushing water from the discharge pipe. If it is a full magnetic roller, the discharge is carried out by a brush roller. Non-magnetic or weakly magnetic minerals are left in the slurry with the slurry discharge tank, that is, tailings.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
the environmentally friendly ptms magnetic separator technology uses new materials and energy saving
