PTMS magnetic separator equipment is generally divided into two categories of weak magnetic field magnetic separation equipment and strong magnetic field magnetic separation equipment according to the strength of the magnetic field (there are also three categories of weak magnetic field, medium magnetic field and strong magnetic field). Weak magnetic field: The magnetic field strength is less than 3 000 ost, mainly used for sorting strong magnetic minerals. Strong magnetic field: The magnetic field strength is greater than 3 000 ost, mainly used for sorting weak magnetic minerals.
Wet PTMS magnetic separator: The cylinder is rolled with stainless steel plate, and a layer of wear-resistant material (rubber or copper wire) is added to the surface of the cylinder to protect it from wear, and to strengthen the cylinder's adhesion and carrying effect on magnetic minerals. The cylinder is rotated by a motor driven by a reducer. The magnetic system is mounted in a cylinder and fixed to the main shaft. The magnetic poles alternate between the N and S poles along the circumference. The magnetic system is fixed in the sorting process.
The bottom box of PTMS magnetic separator is made of non-magnetic materials or materials with poor magnetic permeability, such as stainless steel plate, copper plate, rigid plastic plate, wooden plate, etc. The lower part of the bottom box is the mining area, in which there is a water pipe inserted to adjust the concentration of the sorted pulp, so that the ore particles enter the sorting space in a "loose" state, which can not only prevent the precipitation of the ore particles in the pulp, but also improve the sorting effect.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com