PTMS Magnetic Separator The surface of the drum is strictly prohibited from bumping and colliding. The wear and tear of the drum skin should be checked frequently. When the outer shell wear depth exceeds 1 mm, it should be replaced in time. The surface of the magnetic roll is often cleaned to absorb the iron filings that have not fallen off to reduce wear. Too much iron filings will cause huge resistance and seriously affect the effect of magnetic separation. No matter whether the equipment is working or not, no staff is allowed on the tape.
Prohibit ferromagnetic objects (above 1mm) from approaching the surface of PTMS Magnetic Separator to avoid equipment damage. Larger iron is adsorbed to the drum may not be able to remove. Check the fixing screws frequently to avoid device failure due to loosening. Magnetic cards, mobile phones, watches and other easily magnetized items do not approach magnetic roll! The machine should avoid high temperature and direct sunlight.
To ensure that the Magnetic field strength of the magnetic system does not weaken, it is necessary to keep the small PTMS Magnetic Separator away from the interference of the external strong magnetic field; The magnetic system is not subject to strong shocks; The drum shall not be dismantled without the approval of the company; Do not store magnetic separation equipment in a place where the temperature is too high or too low.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com
The intelligent control system is applied to PTMS MAGNETIC SEPARATOR to solve the disadvantages of traditional methods
