When protecting the shell of PTMS magnetic separator, copper wire or aluminum wire can be wrapped on the shell to act as the wear-resistant layer of the shell to realize the role of protecting the shell. The use of copper wire or aluminum wire to protect the shell is good, and the cost of protective materials is low, and the operation is relatively convenient;
The second is the selection of vulcanized rubber as a protective material to protect PTMS magnetic separator shell. In the selection of rubber shell, high-quality wear-resistant vulcanized rubber should be selected. The shell is wrapped according to the length and diameter of the equipment shell, and the thickness of the rubber protective layer is controlled within 1mm-3mm. The use of rubber skin for barrel protection has high effect and high wear resistance coefficient, but the relative cost is high;
When protecting the barrel, asphalt coating can also be sprayed on the barrel of PTMS magnetic separator equipment for effective protection. The asphalt spraying protective layer has low cost and also has a high protective effect. It should be noted that the surface thickness of the barrel must be uniform when asphalt spraying the barrel. Avoid uneven coating thickness resulting in uneven magnetic source magnetic field strength, affecting the magnetic separation effect.
Contact: DELLA
Mob: +86-13929907491
No.9, Factory 2, Shijin Industry Park, Shishan Town, Nanhai District, Foshan City, Guangdong, China
Ph: +86-13929907491
E-mail: Sales@powtechina.com